lab64 makerspace

IEEE Arduino Robotics Workshop [lab64]

Topic: 
Build an obstacle avoiding robot
Abstract / Description: 
Learn how to program an Obstacle Avoiding Robot (be sure to RSVP via the link below)
  • Learn basic robotic fundamentals using a simple 2 wheel servo motor driven platform
  • Practice primary microcontroller concepts such as pulse width modulation, analog to digital conversion and finite state machine design
  • The robot platforms are based on the Mega324P Xplained Mini evalplatform which will be preloaded to look like an Arduino board.


Please RSVP

Date and Time: 
Thursday, February 9, 2017 - 5:00pm
Venue: 
lab

Pizza & next quarter projects [lab64 workshop]

Topic: 
3D Modeling with Solidworks
Abstract / Description: 

Interested in learning more about electronics? Join us in lab64 for weekly workshops. This quarter's workshops are currently scheduled for Wednesday nights in lab64 at 7pm, and aim to last about two hours.

  • Week 1: Soldering Basics
  • Week 2: Introduction to PCB Design / Altium
  • Week 3: Introduction to SMT Assembly
  • Week 4: Introduction to PCB Design / EAGLE
  • Week 5: 3D Modeling with Solidworks
  • Week 6: Low Volume SMT Assembly and Rework
  • Week 7: 3D Printing and Lasercutting
  • Week 8: Introduction to FPGAs
  • Week 9: 3D Modeling with Solidworks  Fill out this form so that we will have enough pizza while we talk about projects for next quarter.

 

Please note that the topics and/or schedule may change at any time. 
Contact Sam Girvin with questions.

Date and Time: 
Wednesday, March 8, 2017 - 7:00pm
Venue: 
lab64 (Packard 064)

Introduction to FPGAs [lab64 workshop]

Topic: 
Introduction to FPGAs
Abstract / Description: 

FPGA workshop:
This week's workshop will be super exciting! We'll be learning about field-programmable gate arrays, or FPGAs. An FPGA is basically a piece of reconfigurable hardware – code that you write gets synthesized into physical logic gates on the chip, which allows you to work with really fast signals and do very precise timing.

If you've never used an FPGA before, this will be a really cool workshop –we'll be starting from the ground up and programming a little FPGA board that's great for prototyping with. You'll need a laptop to participate in the workshop.


 

Interested in learning more about electronics? Join us in lab64 for weekly workshops. This quarter's workshops are currently scheduled for Wednesday nights in lab64 at 7pm, and aim to last about two hours.

  • Week 1: Soldering Basics
  • Week 2: Introduction to PCB Design / Altium
  • Week 3: Introduction to SMT Assembly
  • Week 4: Introduction to PCB Design / EAGLE
  • Week 5: 3D Modeling with Solidworks
  • Week 6: Low Volume SMT Assembly and Rework
  • Week 7: 3D Printing and Lasercutting
  • Week 8: Introduction to FPGAs
  • Week 9: 3D Modeling with Solidworks

 

Please note that the topics and/or schedule may change at any time. 
Contact Sam Girvin with questions.

Date and Time: 
Wednesday, March 1, 2017 - 7:00pm
Venue: 
lab64 (Packard 064)

3D Printing and Lasercutting [lab64 workshop]

Topic: 
3D Printing and Lasercutting
Abstract / Description: 

Interested in learning more about electronics? Join us in lab64 for weekly workshops. This quarter's workshops are currently scheduled for Wednesday nights in lab64 at 7pm, and aim to last about two hours.

  • Week 1: Soldering Basics
  • Week 2: Introduction to PCB Design / Altium
  • Week 3: Introduction to SMT Assembly
  • Week 4: Introduction to PCB Design / EAGLE
  • Week 5: 3D Modeling with Solidworks
  • Week 6: Low Volume SMT Assembly and Rework
  • Week 7: 3D Printing and Lasercutting
  • Week 8: Introduction to FPGAs
  • Week 9: 3D Modeling with Solidworks

 

Please note that the topics and/or schedule may change at any time. 
Contact Sam Girvin with questions.

Date and Time: 
Wednesday, February 22, 2017 - 7:00pm
Venue: 
lab64 (Packard 064)

Intro to Prototyping Techniques [lab64 workshop]

Topic: 
Intro to Prototyping Techniques
Abstract / Description: 

Interested in learning more about electronics? Join us in lab64 for weekly workshops. This quarter's workshops are currently scheduled for Wednesday nights in lab64 at 7pm, and aim to last about two hours.

  • Week 1: Soldering Basics
  • Week 2: Introduction to PCB Design / Altium
  • Week 3: Introduction to SMT Assembly
  • Week 4: Introduction to PCB Design / EAGLE
  • Week 5: 3D Modeling with Solidworks
  • Week 6: Low Volume SMT Assembly and Rework  CHANGED TO: Intro to Prototyping Techniques
  • Week 7: 3D Printing and Lasercutting
  • Week 8: Introduction to FPGAs
  • Week 9: 3D Modeling with Solidworks

 

Please note that the topics and/or schedule may change at any time. 
Contact Sam Girvin with questions.

Date and Time: 
Wednesday, February 15, 2017 - 7:00pm
Venue: 
lab64 (Packard 064)

3D Modeling with Solidworks [lab64 workshop]

Topic: 
3D Modeling with Solidworks
Abstract / Description: 

Interested in learning more about electronics? Join us in lab64 for weekly workshops. This quarter's workshops are currently scheduled for Wednesday nights in lab64 at 7pm, and aim to last about two hours.

  • Week 1: Soldering Basics
  • Week 2: Introduction to PCB Design / Altium
  • Week 3: Introduction to SMT Assembly
  • Week 4: Introduction to PCB Design / EAGLE
  • Week 5: 3D Modeling with Solidworks
  • Week 6: Low Volume SMT Assembly and Rework
  • Week 7: 3D Printing and Lasercutting
  • Week 8: Introduction to FPGAs
  • Week 9: 3D Modeling with Solidworks

 

Please note that the topics and/or schedule may change at any time. 
Contact Sam Girvin with questions.

Date and Time: 
Wednesday, February 8, 2017 - 7:00pm
Venue: 
lab64 (Packard 064)

Introduction to PCB Design / EAGLE [lab64 workshop]

Topic: 
Introduction to PCB Design / EAGLE
Abstract / Description: 

Interested in learning more about electronics? Join us in lab64 for weekly workshops. This quarter's workshops are currently scheduled for Wednesday nights in lab64 at 7pm, and aim to last about two hours.

  • Week 1: Soldering Basics
  • Week 2: Introduction to PCB Design / Altium
  • Week 3: Introduction to SMT Assembly
  • Week 4: Introduction to PCB Design / EAGLE
  • Week 5: 3D Modeling with Solidworks
  • Week 6: Low Volume SMT Assembly and Rework
  • Week 7: 3D Printing and Lasercutting
  • Week 8: Introduction to FPGAs
  • Week 9: 3D Modeling with Solidworks

 

Please note that the topics and/or schedule may change at any time. 
Contact Sam Girvin with questions.

Date and Time: 
Wednesday, February 1, 2017 - 7:00pm
Venue: 
lab64 (Packard 064)

Introduction to SMT Assembly [lab64 workshop]

Topic: 
Introduction to SMT Assembly
Abstract / Description: 

Interested in learning more about electronics? Join us in lab64 for weekly workshops. This quarter's workshops are currently scheduled for Wednesday nights in lab64 at 7pm, and aim to last about two hours.

  • Week 1: Soldering Basics
  • Week 2: Introduction to PCB Design / Altium
  • Week 3: Introduction to SMT Assembly
  • Week 4: Introduction to PCB Design / EAGLE
  • Week 5: 3D Modeling with Solidworks
  • Week 6: Low Volume SMT Assembly and Rework
  • Week 7: 3D Printing and Lasercutting
  • Week 8: Introduction to FPGAs
  • Week 9: 3D Modeling with Solidworks

 

Please note that the topics and/or schedule may change at any time. 
Contact Sam Girvin with questions.

Date and Time: 
Wednesday, January 25, 2017 - 7:00pm
Venue: 
lab64 (Packard 064)

Introduction to PCB Design / Altium [lab64 workshop]

Topic: 
Introduction to PCB Design / Altium
Abstract / Description: 

Interested in learning more about electronics? Join us in lab64 for weekly workshops. This quarter's workshops are currently scheduled for Wednesday nights in lab64 at 7pm, and aim to last about two hours.

  • Week 1: Soldering Basics
  • Week 2: Introduction to PCB Design / Altium
  • Week 3: Introduction to SMT Assembly
  • Week 4: Introduction to PCB Design / EAGLE
  • Week 5: 3D Modeling with Solidworks
  • Week 6: Low Volume SMT Assembly and Rework
  • Week 7: 3D Printing and Lasercutting
  • Week 8: Introduction to FPGAs
  • Week 9: 3D Modeling with Solidworks

 

Please note that the topics and/or schedule may change at any time.
Contact Sam Girvin with questions.

Date and Time: 
Wednesday, January 18, 2017 - 7:00pm
Venue: 
lab64 (Packard 064)

Pages

Subscribe to RSS - lab64 makerspace