Program Information:Master of Science DegreeFrom Stanford Electrical Engineering Department Graduate Handbook(Difference between revisions)
Revision as of 22:18, 8 October 2012
Guidelines for Preparing the MS Program ProposalThe Program Proposal form can be found here.
The Program Proposal form must be approved by the student's faculty academic adviser and be submitted to the EE Degree Progress office (Packard 177) prior to the end of the first quarter of enrollment in the program (second quarter for HCP students). The faculty does not prescribe specific courses to be taken. Each student, with the help of their faculty adviser, prepares a program of study to meet his or her particular research interests and submits it to the faculty for approval. Guidelines for course programs that will normally be approved are listed below.
If your plans for meeting the degree requirements change, you must submit a revised program proposal to the department’s student services office for approval early in your final quarter in the program. The University’s minimum requirement for each master's degree is 45 unduplicated units of work done at Stanford. Students must also maintain a minimum cumulative GPA of 3.0 in order to maintain good academic standing.
There is a three year limit from the first quarter of enrollment in the Master’s Program to conferral of the degree--the MS program is usually completed in five academic year quarters. For coterminal students, the three year period begins in the first quarter of graduate standing. Students in the Honors Cooperative Program have a five year limit for completing the degree. During your final quarter in the program, you must submit an Application to Graduate for Advanced Degrees through Axess.
In order to meet the requirements of the EE-MS degree, you must meet the following guidelines:
Of the 45 units that are required to complete the requirements of the EE-MS degree: o At least 36 units must be letter graded units. These are fulfilled through:
• 21 units in EE-Related courses (9 units 300 level or higher, 12 units 200 level or higher). These are comprised of the 18 units of Depth and Breadth, described above, plus an additional 3 units (excluding EE 278A). The list of approved depth sequences, approved breadth courses, and approved Related courses is in the EE Graduate Handbook below. • 15 units may be any 100 level or higher courses in technical areas in any math/science/engineering department. You may include up to 6 units of EE 391 Special Studies (independent study).
o 9 units may be taken Credit/No Credit or for letter grades. This includes the 1-unit seminar requirement. All units must be at the 100 level or higher. No courses numbered below 100 count toward a graduate degree. The only exception is that you may count up to 2 units of Athletics courses.
New students are strongly advised not to undertake a heavy academic program in their first quarter at Stanford, as they are adjusting to their new environment and the demanding nature of graduate work. Three regular courses (8-10 units) provide a full-time workload, particularly during the first quarter at Stanford. The student's adviser should be consulted for further guidance on this and other course-enrollment questions.
Special StudiesStudents are encouraged to take full advantage of the opportunities for individual work (Special Studies) under the direction of individual faculty members, under the heading of EE 390 (satisfactory/no credit) or EE391(letter grade). Possibilities under this heading range from directed reading in an area of mutual interest to the equivalent of an M.S. thesis. These courses cannot be applied toward the fulfillment of the depth and breadth requirements.
Transfer CreditStudents may not transfer credits from a previously earned degree to count toward the requirements of the MS degree program. NDO students may, however, apply up to 18 units of Stanford coursework toward their EE degree.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Every attempt should be made to meet the above guidelines.
Courses that deviate from one or more of the guidelines listed above must be approved by your faculty program advisor and the EE Degree Progress Office (via an independent faculty review). Students contemplating a special program should submit a current Master's Program Proposal along with a Deviation Petition form, describing their particular objectives and how the proposed program meets these objectives. Submit the forms to the Degree Progress Officer in Packard 177 for a final decision.
|
|
Out of Department Courses Considered as EE Courses (Related Courses)
Please note that not all courses may be offered every year.
| Course | Title | Equivalent EE Level |
| AA 244A | Introduction to Plasma Physics and Engineering | 200-299 |
| AA 272C | Global Positioning Systems | 200-299 |
| APPPHYS 202 |
Quantum Probability and Quantum Information |
200-299 |
| APPPHYS 203 |
Atoms, Fields and Protons |
200-299 |
| APPPHYS 207 | Laboratory Electronics | 100-199 |
| APPPHYS 208 | Laboratory Electronics | 100-199 |
| APPPHYS 227 | Quantum Device Physics of Atomic and Semiconductor Systems | 200-299 |
| APPPHYS 272 | Solid State Physics | 200-299 |
| APPPHYS 273 | Solid State Physics II | 200-299 |
| APPPHYS 304 | Lasers Laboratory | 300-399 |
| APPPHYS 305 | Nonlinear Optics Laboratory | 300-399 |
| APPPHYS 387 | Quantum Optics and Measurements | 300-399 |
| BIOE 334 | Engineering Principles in Molecular Biology | 300-399 |
| CS 107 | Computer Organization and Systems | 100-199 |
| CS 108 | Object-Oriented Systems Design | 100-199 |
| CS 110 | Principles of Computer Systems | 100-199 |
| CS 140 | Operating Systems and Systems Programming | 200-299 |
| CS 143 | Compilers | 200-299 |
| CS 144 | Introduction to Computer Networking | 200-299 |
| CS 148 | Introduction to Computer Graphics and Imaging |
100-199 |
| CS 194 | Software Project | 100-199 |
| CS 205A | Mathematical Methods for Robotics, Vision, and Graphics | 200-299 |
| CS 221 | Artificial Intelligence: Principles and Techniques | 200-299 |
| CS 231A | Introduction to Computer Vision | 200-299 |
| CS 228 | Probabilistic Graphical Models: Principles and Techniques |
300-399 |
| CS 229 | Machine Learning | 300-399 |
| CS 229A |
Applied Machine Learning |
200-299 |
| CS 240 | Advanced Topics in Operating Systems | 200-299 |
| CS 242 | Programming Languages | 200-299 |
| CS 243 | Program Analysis and Optimizations | 300-399 |
| CS 244 |
Advanced Topics in Networking |
200-299 |
| CS 244E | Networked Wireless Systems | 200-299 |
| CS 245 | Database Systems Principles | 300-399 |
| CS 248 | Interactive Computer Graphics |
200-299 |
| CS 255 | Introduction to Cryptography | 200-299 |
| CS 315A | Parallel Computer Architecture and Programming | 300-399 |
| CS 315B | Parallel Computing Research Project | 300-399 |
| CS 321 | Information Processing for Sensor Networks | 300-399 |
| CS 343 | Advanced Topics in Compilers | 300-399 |
| CS 344 | Topics in Computer Networks | 300-399 |
| CS 347 | Parallel and Distributed Data Management | 300-399 |
| CS 348A | Computer Graphics: Geometric Modeling | 300-399 |
| CS 348B | Computer Graphics: Image Synthesis Techniques | 300-399 |
| CS 448B | Data Visualization | 300-399 |
| ENGR 105 | Feedback Control Design | 100-199 |
| ENGR 205 | Introduction to Control Design Techniques | 200-299 |
| ENGR 206 | Control System Design | 200-299 |
| ENGR 207A | Linear Control Systems I | 300-399 |
| |
|
|
| ENGR 209A | Analysis and Control of Nonlinear Systems | 300-399 |
| |
|
|
| ENGR 240 | Introduction to Micro and Nano Electromechanical Systems | 200-299 |
| ENGR 341 | Micro/Nano Systems Design and Fabrication | 300-399 |
| |
|
|
| MATSCI 199/MATSCI 209 | Electronic and Optical Properties of Solids | 200-299 |
| MATSCI 316 | Nanoscale Science, Engineering, and Technology | 300-399 |
| MATSCI 323 | Thin Film and Interface Microanalysis | 200-299 |
| MATSCI 343 | Organic Semiconductors for Electronics and Photonics | 300-399 |
| MATSCI 347 | Introduction to Magnetism and Magnetic Nanostructures | 200-299 |
| ME 358 | Heat Transfer in Microdevices | 200-299 |
| MS&E 237 | The Social Data Revolution: Data Mining and Electronic Business | 200-299 |
| MS&E 251 | Stochastic Decision Models | 200-299 |
| MS&E 310 | Linear Programming | 300-399 |
| MS&E 311 | Optimization | 300-399 |
| MS&E 313 | Vector Space Optimization | 300-399 |
| MS&E 321 | Stochastic Systems | 300-399 |
| MS&E 322 | Stochastic Calculus and Control | 300-399 |
| MS&E 336 | Topics in Game Theory with Engineering Applications | 300-399 |
| MS&E 338 | Advanced Topics in Information Science and Technology | 300-399 |
| |
|
|
| MS&E 351 | Dynamic Programming and Stochastic Control | 300-399 |
| MUSIC 420A | Signal Processing Models in Musical Acoustics | 300-399 |
| MUSIC 421A | Audio Applications of the Fast Fourier Transform (FFT) | 300-399 |
| MUSIC 422 | Perceptual Audio Coding | 300-399 |
| MUSIC 424 |
Signal Processing Techniques for Digital Audio Effects |
300-399 |
| PSYCH 221 | Applied Vision and Image Systems | 300-399 |
| RAD 226 | In Vivo Magnetic Resonance Spectroscopy and Imaging | 300-399 |
| STATS 315A | Modern Applied Statistics: Learning | 300-399 |
| STATS 315B | Modern Applied Statistics: Data Mining | 300-399 |
| STATS 375 |
Inference in Graphical Models |
300-399 |
The following courses were previously approved as Related courses but are no longer offered:
AA 251 Introduction to the Space Environment
ENGR 207B Linear Control Systems II
ENGR 210B Advanced Topics in Computation for Control
GEOPHYS 265 Imaging Radar and Applications
MS&E 339 Approximate Dynamic Programming
Acceptable Courses for the Depth and Breadth Areas
The following list satisfies the depth requirement for the different specializations shown. A depth sequence consists of three courses taken from a single line and must contain a minimum of one class at the 300 level or above.
The breadth requirement is satisfied by courses from three different areas not including any courses in the selected depth area. Two courses are not considered as being in distinct areas if they can be found under a common depth area (some courses appear in multiple depth areas). Courses such as 293A and B under General Breadth may be used as breadth but are not part of a depth sequence.
Any 200 level or higher EE-Related courses that are not listed below (excluding EE 278A) may be taken as "additional EE courses", to satisfy the 21 units of EE courses requirement.
Please note that not all courses may be offered every year.
updated 10/4/12
- Biomedical Sensing and Imaging
- 202, 225, (264 or 265), 302, 303, 331, 369A, 369B, 418
- Computer Hardware
- 271, 273, 282, 382C, 382E, CS 315A, CS 315B
- Computer Software Systems
- (EE 284 or CS 144), CS 242, CS 140, CS 240, CS 243, CS 245
- CS 248, CS 348A, CS 348B
- CS 143, CS 242, CS 243, CS 245, CS 343
- Control and System Engineering
- 263, 363, 365, ENGR 205, ENGR 207B, ENGR 209A
- Communication Systems
- 276, 279, 359, 360, 379
- 375, 376A, 376B, 379, 387, 388, 477, 478
- 247, 279, 345, 347, 348, 379
- 276, 279, 359, 360, 379
- Dynamic Systems and Optimization
- 263, 363, 364A, 364B, 365, MS&E 351, MS&E 339, MS&E 310, MS&E 311, MS&E 313, MS&E 321, MS&E 322
- Electronic Circuits
- 214B, 271, 313, 314A (formerly 314), 314B, 315A, 315B, (344 or 414), 371
- Electronic Devices, Sensors and Technology
- 212, 216, 248, 292L, 311, 312, 316, 317, 320, 321, 410, ENGR 240, ENGR 341, ENGR 342
- Fields, Waves and Radioscience
- 242, 252, 254, 256, 262, 303, 346, 355, AA 244, AA 251
- 242, 252, 254, 256, 262, 303, 346, 355, AA 244, AA 251
- Image Systems
- 262, 331, 366, 368, 369A, 369B, 369C, 469B
- 368, 398A, 398B, Psych 221, CS 231A, CS 248, CS 348A, CS 348B
- Lasers, Optoelectronics and Quantum Electronics
- 231, 232, 234, 235, 243, 268, 334, 336, 340, 343, 346, 349, APPPHYS 304, APPPHYS 305
- Network Systems
- (284 or CS 144), 382C, 384A, 384B, 384C, 384E, 384M, 384S, 384X, 384Y, CS 344, MS&E 336
- Signal Processing
- 278B, 263, 363, 372, 378A, 378B, MS&E 339
- (264 or 265 or 278B), Music 420A, Music 421A, Music 422, Music 424
- CS 221, CS 228, CS 229, Stats 315A, Stats 315B
- Solid State Materials and Devices
- 222, 223, 228, 243, 292L, 327, 328, 329, 335, MATSCI 199/209, MATSCI 323, MATSCI 343, MATSCI 347
- General Breadth (each line considered a separate area)
- 293A, 293B
- 204
- 214A (counts as Electronic Circuits if Electronic Circuits is not the MS depth area)
- 233 (counts as Electronic Circuits if Electronic Circuits is not the MS depth area)
- CS 229A (counts as Signal Processing if Signal Processing is not the MS depth area)
- EE 257/GP 258 (as long as the student’s MS depth area is not Image Systems or Signal Processing)